Taylor 62 - Shake Freezer Four Flavors


Best Seller!

The compact Taylor 62 unit is ideal for customers with medium to high volume who want to add a quality milk shake in four flavors: vanilla, chocolate, strawberry and an optional flavor.

 Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now
Shake profit story

Taylor 62 Shake Freezer Four Flavor Features

Offer four separate shake flavors: chocolate, strawberry, vanilla (unflavored shake mix) and an optional flavor.

Freeze Cylinder 

One, 7 quart (6.6 liter).

Mix Hopper

One, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC).

Indicator Lights

Add Mix light alerts the operator to add mix. When the Mix Out light flashes, the unit automatically shuts down to prevent damage.

Accurate Consistency Control

Torque control precisely maintains superior shake quality in texture, viscosity, and taste.

Shake Syrup System

Shake flavors are selected from push buttons. Three, 1 gallon (3.8 liter) syrup tanks are provided. Optional air compressor or CO2 may be used to pump syrup from the remote tanks. Use only single strength syrup, free from pulp and seeds. Syrup tanks must be located within 5 feet (1.5 m) of the freezer.

Automatic Dispensing

Press the desired flavor and raise the draw handle. Frozen shake mix and syrup automatically blends to dispense the chosen flavor. After the shake is drawn, press the Rinse button to eliminate flavor carryover. Rinse water connection under the unit is 3/8” FPT.

Taylor 62 Specifications


One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor 

One, 1.0 HP

Refrigeration System 

One, 11,000 BTU/hr. R404

Air Cooled

Minimum Clearance: 6” (152 mm) on both sides. It is recommended to place the rear of the unit against the wall to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under the side of base 3/8” FPT.


Air Compressor