Taylor - Taylor Freezer Sales Company

Model 359 – Thick Shake Freezer Two Flavors
Gallery
Model 359 – Thick Shake Freezer Two Flavors

Milkshake

Model 359 – Thick Shake Freezer Two Flavors

Piccadilly2020-05-12T17:47:14-04:00January 4th, 2019|Categories: Milkshake|

The Taylor 359 serves a wide variety of frozen desserts, like thick shakes, with the assurance of safe temperatures for dairy products. Direct draw two flavors, or blend in flavorings for more variety.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor 359 Thick Shake Freezer Features

Serve a wide variety of frozen desserts, like thick shakes and smoothies, with the assurance of safe temperatures for dairy products. Direct draw two flavors, or blend in flavorings for more variety.

Freezing Cylinder

Two, 7 quart (6.6 liter).

Refrigerated Mix Hopper

Two, 20 quart (18.9 liter). Refrigerated to maintain mix temperature below 41ºF (5ºC).

Indicator Lights

If the freezer is out of mix, the Mix Out light will come on, and the freezer shuts down automatically to prevent damage. Less than one pint ( .5 liter) is left in the hopper when the mix out system is activated.

Solid State Controls

Thermistor control precisely monitors temperature and maintains consistent quality in product texture through solid state technology.

Thumb Grip Draw Handle

Draw handle makes dispensing of product easy by squeezing two levers together.

Fast Ejection

Beater design ejects product quickly to serve customers faster. Dispense a 16 fl. oz. (473 ml) serving in approximately 3 seconds.

Plastic Hopper Cover

Durable, plastic hopper cover maintains its shape through years of use.

Taylor 359 Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, approximately 9,500 BTU/hr. R404A.

BTUs may vary depending on compressor used.)

Air Cooled

Minimum Clearance: 3” (76 mm) around all sides. Minimum air clearances

must be met to assure adequate air flow for optimum performance.

Options

Bumper Kit

Model 358 – Thick Shake Freezer Single Flavor
Gallery
Model 358 – Thick Shake Freezer Single Flavor

Milkshake

Model 358 – Thick Shake Freezer Single Flavor

Piccadilly2020-05-12T17:59:41-04:00January 4th, 2019|Categories: Milkshake|

The Taylor 358 serves a wide variety of frozen desserts, like thick shakes, with the assurance of safe temperatures for dairy products. Direct draw a single flavor, or blend in flavorings for more variety.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor 358 Thick Shake Freezer Features

Serve a wide variety of frozen desserts, like thick shakes and smoothies, with the assurance of safe temperatures for dairy products. Direct draw a single flavor, or blend in flavorings for more variety.

Freezing Cylinder

One, 7 quart (6.6 liter).

Refrigerated Mix Hopper

One, 20 quart (18.9 liter). Refrigerated to maintain mix temperature below 41ºF (5ºC).

Indicator Lights

If the freezer is out of mix, the Mix Out light will come on, and the freezer shuts down automatically to prevent damage. Less than one pint ( .5 liter) is left in the hopper when the mix out system is activated.

Solid State Controls

Thermistor control precisely monitors temperature and maintains consistent quality in product texture through solid state technology.

Thumb Grip Draw Handle

Draw handle makes dispensing of product easy by squeezing two levers together.

Fast Ejection

Beater design ejects product quickly to serve customers faster. Dispense a 16 fl. oz. (473 ml) serving in approximately 3 seconds.

Plastic Hopper Cover

Durable, plastic hopper cover maintains its shape through years of use.

Taylor 358 Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, approximately 9,500 BTU/hr. R404A. BTUs may vary depending on compressor used.)

Air Cooled

Minimum Clearance: 3” (76 mm) around all sides. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Options

Bumper Kit

Magnablend
Gallery
Magnablend

Magnablend, Milkshake, Slush FCB Equipment

Magnablend

Piccadilly2020-04-08T22:52:15-04:00October 24th, 2016|Categories: Magnablend, Milkshake, Slush FCB Equipment|

Engineered to drastically increase service speed, the MagnaBlend Frozen Blended Beverage Station boasts a blink-and-you’ll-miss-it — 9-second blend time. And that’s not all. The integrated shaved ice dispenser and rinse station mean there’s no need to move back and forth between separate prep areas. Simply blend, rinse and repeat.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Model C717 – Soft Serve Freezer Twist, Heat Treatment
Gallery
Model C717 – Soft Serve Freezer Twist, Heat Treatment

Soft Serve

Model C717 – Soft Serve Freezer Twist, Heat Treatment

Dani2023-06-25T13:57:18-04:00September 12th, 2016|Categories: Soft Serve|

The Taylor C717 offers all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor C717 Soft Serve Freezer Twist, Heat Treatment Features

Offer all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up

to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix

below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Two Locking Casters

Front casters have a locking feature for operators to keep equipment in place. The lock can be released to move the equipment for cleaning.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Freezer Door

A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.

Taylor C717 Specifications

Electrical

Two dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Options

Cone Dispenser
Drain Adaptor (for ease of rinsing & cleaning)
Draw Valve Lock Kit
Faucet
Hopper Locks
Hopper Agitators
Panel Spinner
Syrup Rail (Integrated)
Syrup Rail Kit (side mount)

Model C717 FAQ

How many servings can the Taylor Model C717 produce per hour?

The Taylor Model C717 has the capacity to produce up to 500 servings of frozen desserts per hour, making it an ideal choice for high-volume operations.

Is the Taylor Model C717 easy to operate and maintain?

Yes, the Taylor Model C717 is designed with user-friendliness in mind. It features an intuitive touchscreen display and easy-to-use controls. Maintenance is also made easy with features such as automatic cleaning and sanitizing programs.

What is the warranty for the Taylor Model C717?

The Taylor Model C717 comes with a one-year warranty that covers parts and labor. Extended warranty options may be available for purchase.

Are there any safety features included with the Taylor Model C717?

Yes, the Taylor Model C717 comes equipped with safety features such as low mix and standby modes, which help prevent product waste and ensure safe operation.

Can the Taylor Model C717 accommodate different mix-in ingredients?

Yes, the Taylor Model C717 can accommodate a variety of mix-in ingredients, including candy, nuts, fruits, and syrups, allowing for a wide range of flavor options.

What kind of power source does the Taylor Model C717 require?

The Taylor Model C717 requires a dedicated electrical circuit with a 208-230V, 60Hz, single-phase power source.

What is the freezing time for the Taylor Model C717?

The freezing time for the Taylor Model C717 varies depending on the type of frozen dessert being made and the mix temperature. Generally, freezing times range from 6 to 8 minutes.

Are there any optional features or accessories available for the Taylor Model C717?

Yes, there are several optional features and accessories available for the Taylor Model C717, including flavor burst and swirl options, cone dispensers, and shake blenders.

Model C716 – Soft Serve Freezer Twist, Pump, Heat Treatment
Gallery
Model C716 – Soft Serve Freezer Twist, Pump, Heat Treatment

Soft Serve

Model C716 – Soft Serve Freezer Twist, Pump, Heat Treatment

Dani2020-05-12T18:51:46-04:00September 12th, 2016|Categories: Soft Serve|

The Taylor C716 offers all the popular soft serve variations from low to non-fat ice creams or yogurt. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor C716 Soft Serve Freezer Features

Offer all the popular soft serve variations from low to non-fat ice creams or yogurt. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of

servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Two Locking Casters

Front casters have a locking feature for operators to keep equipment in place. The lock can be released to move the equipment for cleaning.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Freezer Door

A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.

Taylor C716 Specifications

Electrical

Two dedicated electrical connections are required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A. (BTUs may vary depending on compressor used.

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Options

Cone Dispenser
Drain Adaptor (for ease of rinsing & cleaning)
Draw Valve Lock Kit
Faucet
Hopper Locks
Panel Spinner
Syrup Rail (Integrated)
Syrup Rail Kit (side mount)

Model C709 – Single Flavor, Heat Treatment
Gallery
Model C709 – Single Flavor, Heat Treatment

Soft Serve

Model C709 – Single Flavor, Heat Treatment

Dani2020-05-17T21:35:09-04:00September 12th, 2016|Categories: Soft Serve|

The Taylor C709 Soft Serve Freezer offers all the popular soft serve variations from low- to non-fat ice creams or yogurt.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor C709 Soft Serve Freezer Single Flavor, Heat Treatment Features

Offer all the popular soft serve variations from low- to non-fat ice creams or yogurt.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

One, 3.4 quart (3.2 liter).

Mix Hopper

One, 20 quart (18.9 liter). Refrigerated to maintain mix below 41ºF (5ºC) in Auto and Standby modes.

Indicator Lights

Mix Low light alerts the operator to add mix. When the Mix Out light flashes, the unit automatically goes into Standby mode to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense soft serve desserts. Soft lock out features improve reliability. Temperatures in the hopper or freezing cylinder may be displayed at any point of operation. History of temperatures and times during the last 366 heat cycles may be viewed from the fluorescent display.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Taylor C709 Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A.

Air Cooled

Minimum 6” (152 mm) on both sides and place the back of the unit against a wall to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance. Optional air discharge chute directs heated air exhaust upwards. No clearance required on right side if air discharge chute is used.

Water Cooled

Water inlet and drain connections out rear panel 3/8” FPT.

Options

Cart with casters-height to top of hopper cover: 59-5/8” (1515 mm)
Cone Dispenser
Decals – Vanilla or Flavor Burst Cone
Hopper Locks
Legs – [increase height of unit by 4-1/4” (108 mm)]
Syrup Rail (front mount requires special cart with rear door)
Syrup Rail Kit (side mount)
Top Air Discharge Chute (air cooled only)

Model C708 – Soft Serve Freezer, Heat Treatment
Gallery
Model C708 – Soft Serve Freezer, Heat Treatment

Soft Serve

Model C708 – Soft Serve Freezer, Heat Treatment

Dani2020-05-17T21:35:14-04:00September 12th, 2016|Categories: Soft Serve|

The Taylor C708 offers all the popular soft serve variations from low- to non-fat ice creams or yogurt.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

C708 Soft Serve Freezer Single Flavor, Pump, Heat Treatment Features

Offer all the popular soft serve variations from low- to non-fat ice creams or yogurt.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

One, 3.4 quart (3.2 liter).

Mix Hopper

One, 20 quart (18.9 liter). Refrigerated to maintain mix below 41ºF (5ºC) in Auto and Standby modes. Simplified air/mix pump delivers the precise amount of air and mix to the freezing cylinder, and reduces operator parts.

Indicator Lights

Mix Low light alerts the operator to add mix. When the Mix Out light flashes, the unit automatically goes into Standby mode to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense soft serve desserts. Soft lock out features improve reliability. Temperatures in the hopper or freezing cylinder may be displayed at any point of operation. History of temperatures and times during the last 366 heat cycles may be viewed from the fluorescent display.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Taylor C708 Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart

for the proper electrical requirements. Manufactured to be permanently

connected. Consult your local Taylor distributor for cord & receptacle

specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A.

Air Cooled

Minimum 6” (152 mm) on both sides and place the back of the unit against

a wall to prevent recirculation of warm air. Minimum air clearances must be

met to assure adequate air flow for optimum performance.

Optional air discharge chute directs heated air exhaust upwards. No

clearance required on right side if air discharge chute is used.

Water Cooled

Water inlet and drain connections out rear panel 3/8” FPT.

Options

Cart with casters-height to top of hopper cover: 59-5/8” (1515 mm)
Cone Dispenser
Decals – Vanilla or Flavor Burst Cone
Hopper Locks
Legs – [increase height of unit by 4-1/4” (108 mm)]
Syrup Rail (front mount requires special cart with rear door)
Syrup Rail Kit (side mount)
Top Air Discharge Chute (air cooled only)

Model C152 – Soft Serve Freezer Single Flavor Machine – New Crown Series Design
Gallery
Model C152 – Soft Serve Freezer Single Flavor Machine – New Crown Series Design

Soft Serve

Model C152 – Soft Serve Freezer Single Flavor Machine – New Crown Series Design

Dani2020-06-23T15:26:48-04:00September 7th, 2016|Categories: Soft Serve|

Taylor C152 Soft Serve Freezer Single Flavor Machine

The Taylor C152 offers all the popular soft serve variations from low or nonfat ice creams to custards, yogurt and sorbet.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor C152 Soft Serve Freezer Single Flavor Features

Offer all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet.

Freezing Cylinder

One, 1.5 quart (1.4 liter).

Mix Hopper

One, 8 quart (7.6 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) in Auto and Standby modes.

Indicator Lights

The Mix Low and Mix Out light alerts the operator to add mix. An audible alarm may be enabled to sound when mix is low.

Electronic Controls

Softech™ is our exclusive microprocessor based master control that regulates refrigeration by measuring product viscosity to maintain consistent quality.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Taylor C152 Soft Serve Freezer Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be cord connected. Consult the international Taylor distributor for cord & receptacle specifications for 50 Hz. equipment.

Beater Motor

One, 0.5 HP

Refrigeration System

One, 3,000 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134A. (BTUs may vary based on application)

Air Cooled

Minimum 4″ (102 mm) on both sides. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Options

Cone Dispenser
4″ Legs (Must install skirt on right side of unit to prevent recirculation of warm air)

Model L810 Electric 3 Platen 36″ Grill
Gallery
Model L810 Electric 3 Platen 36″ Grill

Grills

Model L810 Electric 3 Platen 36″ Grill

Dani2020-05-12T22:17:55-04:00August 25th, 2016|Categories: Grills|

Best Seller!

The Taylor L810 grill line features the latest in efficiency, safety and productivity. Just a press of a button cooks healthy seafood, veggie or turkey burgers, grilled sandwiches and much more. Revolutionary two-sided grilling cooks a frozen patty two-thirds faster than traditional flat grills. With programmable cook times, pre-set temperatures and consistent product pressure, you can cook a variety of menu items throughout the day.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor L810 Electric Two-Sided Grill Features

One touch menu selection automatically provides accurate TIME, TEMPERATURE, and GAP settings for every product.

Programmable Controls

Microprocessor controls are programmable for simplified operator operation. Offers flexibility for future menu items and product specification changes at the restaurant level.

External USB Port

External USB port allows user access to upload new menu and promotional items. Menu changes can be sent electronically to other store locations saving time and eliminating operator error.

Upper Platens

Three upper platens will close automatically to the preset gap setting with the touch of one button. Air cylinder system provides quiet, simple, trouble-free operation of the upper platen. As a safety feature, platen will automatically open at loss of power, or if an obstruction is detected.

Precise Automatic Gapping

Solid platform with 3-point reference plane and fixed (home) reference point. Once programmed, the upper platen automatically achieves accurate and consistent gaps, every time. Precise, repeatable gapping assures product safety and better quality finished product.

Cooking Zones

Three separately controlled cooking zones. Each zone has three independent heating elements, and two in the upper platen to assure even temperatures and quick recovery.

Side-To-Side Release Material

Protects entire upper platen cooking surface and makes cleaning easy. Improved installation and removal process away from hot surfaces.

Patty Cook Position Placement Guide

Lower cooking surface is etched for a permanent patty placement guide for two-sided cooking.

Taylor L810 Specifications

Electrical

See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for receptacle specifications as local codes allow. Restraining cable included.

Accessories

Cleaner (1qt)
Grease cans (two, mount on each side)
Release sheets; includes clips and retainer (one box of 9)
Squeegee (one)

Options

Cleaning Pads (10 qty.)
Cleaning Pad Holder
Gap Gage (0.255)
Grill Scraper
Tool Holder

Model L811 Gas/Electric 3 Platen 36″ Grill
Gallery
Model L811 Gas/Electric 3 Platen 36″ Grill

Grills

Model L811 Gas/Electric 3 Platen 36″ Grill

Dani2020-05-17T21:42:52-04:00August 25th, 2016|Categories: Grills|

Best Seller!

The Taylor L811 grill line features the latest in efficiency, safety and productivity. Just a press of a button cooks healthy seafood, veggie or turkey burgers, grilled sandwiches and much more. Revolutionary two-sided grilling cooks a frozen patty two-thirds faster than traditional flat grills. With programmable cook times, pre-set temperatures and consistent product pressure, you can cook a variety of menu items throughout the day.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor L811 Gas Lower Cook Surface/Electric Upper Platens Two-Sided Grill Features

One touch menu selection automatically provides accurate TIME, TEMPERATURE, and GAP settings for every product.

Programmable Controls

Microprocessor controls are programmable for simplified operator operation. Offers flexibility for future menu items and product specification changes at the restaurant level.

External USB Port

External USB port allows user access to upload new menu and promotional items. Menu changes can be sent electronically to other store locations, saving time and eliminating operator error.

Upper Platens

Three upper platens will close automatically to the preset gap setting with the touch of one button. Air cylinder system provides quiet, simple, trouble-free operation of the upper platen. As a safety feature, platen will automatically open at loss of power, or if an obstruction is detected.

Precise Automatic Gapping

Solid platform with 3-point reference plane and fixed (home) reference point. Once programmed, the upper platen automatically achieves accurate and consistent gaps, every time. Precise, repeatable gapping assures product safety and better quality finished product.

Cooking Zones

Three separately controlled cooking zones. Three independent controlled gas infra-red burners heat the lower cook surface. Each upper platen contains two independently controlled electric heating elements. Together these thermal systems provide even plate temperatures and quick recovery.

Side-To-Side Release Material

Protects entire upper platen cooking surface and makes cleaning easy. Improved installation and removal process away from hot surfaces.

Patty Cook Position Placement Guide

Lower cooking surface is etched for a permanent patty placement guide for two-sided cooking.

Taylor L811 Gas Lower Cook Surface/Electric Upper Platens Two-Sided Grill Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Consult your local Taylor distributor for receptacle specifications as local codes allow.

Gas

Three ceramic infrared burners; 25,000 BTUH each. Manifold pressure; 3.5” w.c. natural; 10.5” w.c. propane

Includes:

Flue deflector and restraining cable 3/4″ Flexible gas inlet hose, with female fitting connection for ½” pipe thread on grill and female fitting for 1″ pipe thread at wall.

Accessories

Cleaner (1qt)
Grease cans (two, mount on each side)
Release sheets; includes clips and retainer (one box of 9)
Squeegee (one)

Options

Cleaning Pads (10 qty.)
Cleaning Pad Holder
Gap Gage (0.255)
Grill Scraper
Tool Holder