Soft Serve

Offer all the popular soft serve variations from low or nonfat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

For more information, call us at 1-800-768-6945 or

Taylor C722 Soft Serve Freezer Twin Twist, Pump Features

Offer all the popular soft serve variations from low or nonfat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Freezing Cylinder

Two, 2.8 quart (2.7 liter).

Mix Hopper

Two, 14 quart (13.2 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be

enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Freezer Door

A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.

Taylor C722 Soft Serve Freezer Twin Twist, Pump Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.0 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A.

Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air Cooled

Minimum 6” (152 mm) on both sides. It is recommended to place the rear of the unit against a wall, or allow 6” clearance (152 mm) at the rear. Optional air discharge chute directs heated air exhaust upwards; minimum clearance above top air discharge chute is 12” (305 mm). No clearance required on right side if air discharge chute is used.

Water Cooled

Water inlet and drain connections out rear panel 3/8” FPT.

Taylor C722 Soft Serve Freezer Twin Twist, Pump Options

• Standard Cart with casters and a door (shown) Net Weight: 74 lbs. (33.6 kg) Crated Weight: 95 lbs. (43.1 kg)
• ADA Cart with casters – recommended for self service to meet ADA compliant dispensing height – no door (see C722 ADA spec. sheet) Net Weight: 74 lbs. (33.6 kg) Crated Weight: 87 lbs. (39.5 kg)
• Drain Adaptor (for ease of rinsing & cleaning)
• Draw handles to comply with ADA force requirement
• Draw Valve Lock Kit
• Hopper Locks
• Hopper Agitators
• Legs – [increase height of unit by 4-1/4” (108 mm)]
• Decals – Twist or Flavor Burst Cone
• Top Air Discharge

Best Seller!

We recommend this high capacity unit for customers with high volume and large peak demands who want to serve a variety of flavors.

For more information, call us at 1-800-768-6945 or

Taylor C713 Soft Serve Freezer Twist Features

Offer all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Taylor C713 Soft Serve Freezer Twist Specifications

Electrical

Two dedicated electrical connections are required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Taylor C713 Soft Serve Freezer Twist Options 

• Cone Dispenser
• Drain Adaptor (for ease of rinsing & cleaning)
• Draw Valve Lock Kit
• Faucet
• Hopper Locks
• Hopper Agitators
• Panel Spinner
• Syrup Rail (Integrated)
• Syrup Rail Kit (side mount)

Best Seller!

We recommend this high capacity unit for customers with high volume and large peak demands who want to serve a variety of flavors.

For more information, call us at 1-800-768-6945 or

Taylor C712 Soft Serve Freezer Twist, Pump Features

Offer all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Simplified air/mix pumps deliver the precise amount of air and mix to the freezing cylinders, and reduces operator parts. Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Taylor C712 Soft Serve Freezer Twist, Pump Specifications

Electrical

Two dedicated electrical connections are required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Taylor C712 Soft Serve Freezer Twist, Pump Options

• Cone Dispenser
• Drain Adaptor (for ease of rinsing & cleaning)
• Draw Valve Lock Kit
• Faucet
• Hopper Locks
• Hopper Agitators
• Panel Spinner
• Syrup Rail (Integrated)
• Syrup Rail Kit (side mount)

Best Seller Taylor 707 Single Flavor Freezer!

We recommend the Taylor 707 unit for customers with high volume and high peak demands. Both the Razzle Accessory package and the Flavor Burst are good additions to this model to make you extra PROFITS!

For more information, call us at 1-800-768-6945 or

Taylor C707 Soft Serve Freezer Single Flavor Features

Offer all the popular soft serve variations from low or non-fat ice creams to custards, yogurt and sorbet.

Freezing Cylinder

One, 3.4 quart (3.2 liter).

Mix Hopper

One, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Mix Low light alerts operator to add mix. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Electronic Controls

SoftechTM is our exclusive microprocessor based master control that regulates refrigeration by measuring product viscosity to maintain consistent quality.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Digital Temperature Indicator

Hopper temperature is displayed to assure safe product temperatures. Indicator may be switched from Fahrenheit to Celsius temperature display.

Taylor C707 Soft Serve Freezer Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air Cooled

Minimum 6” (152 mm) on both sides and place the back of the unit against a wall to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance. Optional air discharge chute directs heated air exhaust upwards. No clearance required on right side if air discharge chute is used.

Water Cooled

Water inlet and drain connections out rear panel 3/8” FPT. Provided with 4-1/4” (108 mm) legs, which increases height of unit.

Taylor C707 Soft Serve Freezer Options

• Cart with casters-height to top of hopper cover: 59-1/8” (1502 mm)
• Cone Dispenser
• Decals – Vanilla or Flavor Burst Cone
• Hopper Locks
• Legs – [increase height of unit by 4-1/4” (108 mm)]
• Syrup Rail (front mount requires special cart with rear door)
• Syrup Rail Kit (side mount)
• Top Air Discharge Chute (air cooled only)

C201 Cart Weights:

Net: 110 lbs. (49.9 kg) Crated: 143 lbs. (64.9 kg) 23.8 cu. ft. (0.67 cu.m) Continuing research results in steady improvements; therefore, these specifications are subject to change without notice.

Best Seller!

We recommend this Taylor C706 unit for customers with high volume and high peak demands who want to serve a virtually unlimited number of flavors of soft serve.

For more information, call us at 1-800-768-6945 or

Taylor C706 Single Flavor on Cart with Flavor Burst Features

Freezing Cylinder 

One, 3.4 quart (3.2 liter)

Mix Hopper

One, 20 quart (18.9 liter). Simplified air/mix pump delivers the precise amount of mix and air to the freezing cylinder for consistent overrun. Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Mix Low light alerts operator to add mix. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.

Electronic Controls

Softech™ is our exclusive microprocessor based master control that regulates refrigeration by measuring product viscosity to maintain consistent quality.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Digital Temperature Control

Hopper temperature is displayed to assure safe product temperatures. Indicator may be switched from Fahrenheit to Celsius temperature display.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Taylor C706 Single Flavor Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air Cooled

Minimum 6” (152 mm) on both sides and place the back of the unit against a wall to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance. Optional air discharge chute directs heated air exhaust upwards. No clearance required on right side if air discharge chute is used.

Water Cooled

Water inlet and drain connections out rear panel 3/8” FPT. Provided with 4-1/4” (108 mm) legs, which increases height of unit.

Taylor C706 Single Flavor Options

• Cart with casters-height to top of hopper cover: 59-1/8” (1502 mm)
• Cone Dispenser
• Decals – Vanilla or Flavor Burst Cone
• Hopper Locks
• Legs – [increase height of unit by 4-1/4” (108 mm)]
• Syrup Rail (front mount requires special cart with rear door)
• Syrup Rail Kit (side mount)
• Top Air Discharge Chute (air cooled only)

C201 Cart Weights:

Net: 110 lbs. (49.9 kg) Crated: 143 lbs. (64.9 kg) 23.8 cu. ft. (0.67 cu.m)

Continuing research results in steady improvements; therefore, these specifications are subject to change without notice.

Best Seller!

We recommend this compact Taylor C161 unit for customers with moderate volume and little peak demands who want to serve a variety of flavors.

For more information, call us at 1-800-768-6945 or

Taylor C161 Soft Serve Freezer Compact Twin Twist Features

Offer all the popular soft serve variations from low or non-fat ice creams to custard, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Freezing Cylinder

Two, 1.5 quart (1.4 liter).

Mix Hopper

Two, 8 quart (7.6 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) in Auto and Standby modes.

Indicator Lights

The Mix Low light alerts the operator to add mix. Audible alarm may be enabled to sound when mix is low.

Electronic Controls

Finished product quality is monitored by SoftechTM controls that measure viscosity.

Standby

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Air Filter

Easily removable, cleanable air filter helps keep condenser clean for optimal refrigeration system performance.

Door Interlock System

Protects the operator from injury as the beater will not operate without the dispensing door in place.

Taylor C161 Soft Serve Freezer Compact Twin Twist Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be cord connected. Consult the international Taylor distributor for cord & receptacle specifications for 50 Hz. equipment.

Beater Motor

Two, 0.5 HP

Refrigeration System

One, 3,500 BTU/hr compressor (nominal rating). R404A.

Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.

(Actual BTUs will vary based on application.)

Air Cooled

Minimum Clearance: 6” (152 mm) on left and right, and 0” in the rear. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Taylor C161 Soft Serve Freezer Compact Twin Twist Options

• Cone Dispenser
• Legs – [increase height of unit by 4-1/4” (108 mm)]