Milkshake

Model 432 – Frozen Uncarbonated Beverage Freezer – Two Flavors

2020-04-10T20:09:33-04:00August 15th, 2016|Categories: Milkshake, Slush FCB Equipment|

Model 432

Taylor-logo

Vary your menu by offering shakes & smoothies or frozen cocktails, fruit juices, coffees, cappuccino and tea slush beverages, all served at the desired thickness.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Model 430 – Shake Freezer – Single Flavor

2021-08-31T13:07:53-04:00August 15th, 2016|Categories: Milkshake, Slush FCB Equipment|

Taylor 430 Single Flavor Shake Freezer

Taylor-logo

Best Seller!

Vary your menu by serving shakes & smoothies or frozen cocktails, fruit juices, frozen coffees or cappuccino or tea slush beverages all served at the desired thickness with the Taylor 430 single flavor shake freezer.

Download Specifications

For more information, call us at 1-800-768-6945 or

Send us an Email Now

Taylor 430 Frozen Beverage Freezer Single Flavor Features

Vary your menu by offering shakes & smoothies or frozen cocktails, fruit juices, coffees, cappuccino and tea slush beverages, all served at the desired thickness.

Freezing Cylinder

One, 4 quart (3.8 liter).

Mix Hopper

One, 14 quart (13.2 liter). Refrigerated to maintain mix below 41ºF (5ºC). Approved for dairy and non-dairy products.

Indicator Lights

Add Mix light alerts the operator to add mix. When the Mix Out light flashes, the unit automatically shuts down to prevent damage.

Automatic Consistency Control

A specially designed viscosity control automatically maintains superior product quality. An adjustable control allows the operator to serve a wide variety of frozen beverages at the desired thickness.

Taylor 430 Frozen Beverage Freezer Single Flavor Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be cord connected.

Consult the international Taylor distributor for cord & receptacle specifications for 50 Hz. equipment.

Refrigeration System

One, approximately 4,000 BTU/hr compressor. R404A. (BTUs may vary depending on compressor used.)

Beater Motor

One, 1/4 HP.

Air Cooled

Minimum Clearance: 3” (76 mm) on both sides. It is recommended to place the rear of the unit against the wall. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections out of rear 3/8” FPT.

Options

  • Flavor Burst Connection
  • Graphic Panel Decals
  • Panel Spinner
  • Set of Four Flavor Cards; Frozen Drinks, Frozen Fruit Drinks,
  • Frozen Cocktails, Smoothies

Go to Top